STEAM CONDENSATE RETURN PUMPING SETS
 
  • Approved by DEFRA to qualify for Enhanced Capital Allowance Scheme

  • Supplied fully packaged ready to connect and run

  • Stainless Steel vessel, pipework & support frame

  • Low voltage or intrinsically safe control system

  • Cascade duty/assist plus stand-by pump configuration

  • Standard range performance up to 22m3/hr at 95°C up to 40m head

  • Pump inlet-isolating valves & outlet isolating & check valves fitted

  • Three position selector switch for manual or pump cyclical auto-change over

  • Low-high & extra high level liquid control with visible level indicator
     

OPTIONS

  • Condensate loads above 22m3/hr & 95°C can be accommodated

  • Single pump unit

  • Discharge flow control valves can be fitted to ensure pump duty can be maintained at the desired pump curve position, reducing potential for cavitation, vibration & noisy running
 
  • Variable speed pumps

  • Receivers & pipe work available in Copper & Galvanised Carbon Steel

  • Support frame available in Painted Carbon Steel

  • Seven day time switch for automatic pump change over sequencing
     



 

PUMPING SET SELECTION

Significant energy savings and efficiency gains can be made by the accurate selection of Condensate pumping sets. All we need to know is:-

Condensate collection rate

Condensate Temperature

Total resistance head for pump to overcome
 

Our technical department will be pleased to assist with determining your exact requirements
     
Brade Engineering Ltd
Atlas Mills
Atlas Mill Road
Brighouse
West Yorkshire
HD6 1ES

Tel: 01484 711003
Fax: 01484 400145